 |
 |
|
Tapecoat ® T Tape GPE - Cold Applied Tape Coating
|
|
TAPECOAT T TAPE GPE - a 65 mil coating with a 3 mil polyethylene backing and 62 mils of adhesive for ambient temperature, below grade application. The 62 mil adhesive provides T Tape with a high degree of conformability. Appropriate for coating tees, bends and other irregular configurations, such as weld beads, wire connections, thermite-welds and all smaller diameter piping.
|
|
Tapecoat ® CT - Cold Applied Tape Coating
|
|
TAPECOAT CT - a 35 mil cold-applied tape coating with a 7 mil polyethylene film backing and 28 mils of adhesive, for ambient temperature below grade application. Appropriate for coating small to moderate size pipe with a single layer; a 50% overlap may be preferred when coating larger diameter pipe.
|
|
Tapecoat ® Grey Pad - Cold Applied Mesh Backed Tape Coating
|
|
TAPECOAT GRAY PAD - a 65 mil coating, packaged in 6 X 6 pads, with a polypropylene mesh fiber backing and pressure sensitive adhesive; used for easy application as a protective coating on small holidays, wire splices and thermite welds.
|
|
ROYSTON One Step Tape |
|
ROYSTON ONE STEP TAPE – A 35 mil, primerless, cold applied tape coating with a 6 mil UV resistant polyethylene film backing,: for ambient temperature above and below grade application. Color: Green. * |
|
TR GREEN |
|
TR GREEN – A 35 mil cold applied tape with a flexible plastic backing and an elastomeric adhesive, for ambient temperature below grade application. Greenline Tape has a leading adhesive edge to secure the lap seal and guide in spiral wrap applications. Color: Green.
Compatible primer: ROYSTON ROYBOND 747. |
|
Tapecoat ® HT Sealant |
|
HT SEALANT - a conformable water tight coating for irregular surfaces which may be subjected to temperatures up to 300˚F (150˚C).
|
|
ROYSTON SEALANT TAPES |
|
ROYSTON SEALANT TAPES – A moldable synthetic elastomeric adhesive that is specially formulated with different degrees of tack and pliability to accommodate the particular application need such as for sealant, caulking, insulation or waterproofing.
Compatible primer: ROYSTON ROYBOND 747.
TAPE A (Mil Thickness#) – A sealant tape with a moderate degree of tack and pliability.
TAPE C (Mil Thickness#) aka. TAC-TAPE at 125 mils- a sealant tape with a high degree of` tack and pliability.
|
|
Special coatings and repair kits:
HANDY CAP - STANDARD |
|
HANDY CAP - STANDARD - A 4” X 4” exothermic weld coating system used in conjunction with ROYSTON Roybond 747 Primer. 747 Primer is available in aerosol dispensers or standard size liquid containers.
|
|
Tapecoat ® Reinforcing Scrim
|
|
TC REINFORCING SCRIM – a polypropylene cloth material used as an optional reinforcing wrap to increase the impact resistance of liquid coatings. Packaged in rolls 2?, 4? and 6? x 100’.
|
|
Tapecoat TC ® Flo-Coat - Petrolatum Wax System
|
|
TAPECOAT TC FLO-COAT – a corrosion preventive coating paste to fill and coat irregular contours.
|
|
Tapecoat TC ® Mastic
|
|
TAPECOAT TC MASTIC - a thixotropic brush applied coal tar coating for ambient temperature, below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations.
|
|
Tapecoat TC ® Mastic 2000
|
|
TAPECOAT TC MASTIC 2000 – a brush or spray applied bituminous coating for temperatures up to 250°F, below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations.
|
|
Tapecoat TC ® Aluminum Mastic
|
|
TAPECOAT TC ALUMINUM MASTIC – a brush or spray applied aluminum pigmented bituminous coating for ambient temperature, above or below grade application. Appropriate for coating fittings, flanges, valves, mechanical couplings and other irregular configurations. Operation temperature ambient to 250°F.
|
|
ROYSTON ROSKOTE A51 |
|
ROYSTON ROSKOTE A51 - A hydrocarbon resin base mastic coating system for ambient temperature, below grade application. Appropriate for coating fittings, flanges, valves, tanks, mechanical couplings and other irregular configurations.
Compatible primer: ROYSTON RAPID RED |
|
ROSKOTE 201 |
|
ROSKOTE 201 - A coal tar epoxy coating is a cold-applied, 2 component, polyamide cured, coal tar epoxy for above and below ground protection in severely corrosive environments. Through chemical cross linking, forms a tough adhesion resistant coating to withstand physical damage, impact, temperature variations and underground soil stresses. |
|
Accessories:
Royston SpliceRight |
|
Royston SpliceRight - Designed to insulate , waterproof, and protect low-voltage electrical connections. Its tacky elastomeric compound completely seals and waterproofs the connector area. This is then covered with a resin impregnated, moisture cured fabric which when dry provides a mechanical protection for the sealant.
Royston Mini SpliceRight - Designed to protect plastic pipe trace wire splices. It consists of a black elastomeric putty to encapsulate the wire nut, and a 2 part epoxy armor to mechanically protect the putty. |
|
TAPE WRAPPING APPLICATOR
TAPECOAT HAND WRAPSTER - a cold tape hand operated application tool, which can assist the operator in wrapping tape with the proper tension and overlap for piping 4” OD and above.
HEAT APPLICATION TOOL
PROPANE TORCH KIT The Magnum Torch with self-contained torch ignition is a wide mouth propane torch for applying hot applied tapes and sleeves. The kit includes a torch with a built-in igniter, burner head, regulator and 33’ long hose.
|
 |
